These charming inconspicuous charging posts enable to you provide an additional service to your visitors (and staff). They can be used at campsites, hotels, restaurants and visitor centre. Not only can they be used for e-bikes but for other electrical equipment too.


This depends on so many things – scope, quantity, type, material and time of year.  We will discuss delivery at the time of enquiry.  Typically, orders will take between 2 and 6 weeks to fulfil; however, we’ll always do everything possible to meet your deadlines.

We’ll arrange a virtual meeting to discuss your requirements, then a site visit to photograph and absorb the atmosphere and really get a feel for the place.  The next stage is a discussion with our design team and the production of some concepts.  If you like them we’ll do a quote and take it from there; if you don’t like them we’ll go back to our design team and have another go until you’re happy!


We want to work with you.


Click here to explore some projects.

This depends on many things – the type and quality of timber, ground and atmospheric conditions, shady or sunny locations – making it impossible to give a definitive answer.


We use good quality hardwoods such as oak, chestnut, greenheart and iroko, and in a good environment (avoiding damp ground and shady conditions) our products can last many years.

HardRok is a premium graphics panel, formed by printing pin-sharp graphics onto an aluminium panel and encapsulating it within a specialist lacquer.  This gives it superior vandal resistance and a 10-year anti-fade guarantee.  HardRok panels can be supplied as a flat panel or a tray and have been used very successfully in many products at locations from the Scilly Isles to the South Downs to archaeological heritage sites in deepest Lancashire.

Take a look at our blog to find out a bit more.

Note that the characteristically golden shade will fade relatively quickly once installed and the timber will ‘silver down’ over time.  This can be overcome by regular treatment with a UV-inhibiting surface coating.


Certain timbers such as oak have a high tannin content which is most common in fresh-sawn sections.  Tannins appear as black streaks and markings and these will disappear as the timber weathers down.  They can be sanded off when the timber is dry, or treated with a weak Oxalic Acid solution (maintaining suitable safety precautions).


Timber is a natural product and changes according to moisture levels.  Once it is cut it can be used fresh-sawn or it can be air-dried/kiln-dried.  However, all timber can split as it dries – this should be recognised as a natural feature and doesn’t weaken it structurally.


You might find our blog helpful.

  • ISO 9001 2015 badge white
  • ISO 14001 2015 badge white
  • Constructionline Logo
  • WSC tractor SSIP
  • Sign Design Society Member logo
  • Grown In Britain
  • FSC® certified products available upon request

    FSC® certified products available upon request

  • madebylandmark greenweb

We use cookies to ensure that we give you the best experience on our website.